Chiptuning Catalog
BMW / 3 / F30 (2012-) / 340xi 2016 -
| BMW |
| model: 3 |
| generation: F30 |
| version/engine: 340xi 2016 -, B58 3.0 Twin scroll turbo |
OPTION
|
ADDITIONAL INFORMATION
|
PRICE
|
|---|---|---|
Stage 1 |
Stage 1
MG flasher provides tuning capability of BMW Fxx/Gxx series equipped with B58 engine controlled by DME86X ECU. MG Flasher is a mobile App prepared for iOS and Android users. The tuning is simple - connect your mobile device to OBD connector with Wi-Fi adapter or D-can cable and tune your BMW with provided OTS maps. Flashing time is less than 1 minute!
STAGE 1: + 69hp + 63ftlb / 85NM Torque (412hp 423ftlb / 573NM @ Crank)
A great, entry level software flash designed for all stock components and 91 Octane or greater. This software is intended to be a step up from BMW Performance Software (MPPKS), which reduces the torque spikes, increases power and smooths out the overall powerband. You will notice an increase in responsiveness as well as drivability. Technical Information: Boost Pressure: 16 PSI (1.1 Bar) options: Exhaust BurbleCold Start Delete Display NBT HP/TQ gauges calibration
$soon
|
$soon |
Stage 2 |
Stage 2
MG flasher provides tuning capability of BMW Fxx/Gxx series equipped with B58 engine controlled by DME86X ECU. MG Flasher is a mobile App prepared for iOS and Android users. The tuning is simple - connect your mobile device to OBD connector with Wi-Fi adapter or D-can cable and tune your BMW with provided OTS maps. Flashing time is less than 1 minute!
STAGE 2: +99hp +118ftlb (442hp 478ftlb / 648NM @ Crank)
For the spirited driver that wants the most out of their stock component vehicle. This software is intended to safely maximize your vehicle’s potential performance. The power curve has been delicately engineered to eliminate any dips in the overall powerband as well as maximizing delivery of that power throughout the entire RPM range. Designed to work with 93/94 Octane for best results. *Transmission Tuning Recommended* - See technical information for more. Technical Information: Boost Pressure: 19 PSI (1.3 Bar) Options: - Exhaust Burble - Cold Start Delete - Display NBT HP/TQ gauges calibration Transmission Limiter Information: The 340i is equipped with an 8HP50 transmission where the factory torque limiter is set to 550nm which is roughly 400tq @ the crank. For the best results and proper smoothing of the torque curve without any transmission related torque intervention we have found that is best to increase the limiter within the transmission software. We can present you with two options to implement this on your vehicle. Option 1: Lifting the limiter in the transmission ECU which can be done for example with xHP Flashtool - based on public information from their Facebook Page the flashing possibility arriving approximately in December Option 2: Bringing the car to our shop for reprogramming of the transmission ECU
$soon
|
$soon |
